To install on unix perform the following steps:
Here are a lit of packages you should install for getting Embperl to work. mod_perl, Apache::Session, Apache::SessionX, libxml2, libxlst are optional and need only to be install when you require their functionality.
mod_perl
Apache::Session
Apache::SessionX
libxml2
libxlst
debian comes with the package `libembperl-perl/stable 2.5.0-17 amd64`. So just run
sudo apt install libembperl-perl
and you are done. If you want to install a newer version from the source, continue to read. Install prerequistite
sudo apt update sudo apt -y install libextutils-xsbuilder-perl libapache2-mod-perl2-dev apache2-dev \ libcgi-pm-perl libapache-sessionx-perl libextutils-pkgconfig-perl libxml2-dev libxslt1-dev
Not all module are available as precomipled packages, so you have to install some from cpan:
yum -y install mod_perl-devel perl-Apache-Session perl-ExtUtils-PkgConfig || exit 1 cpan LWP::UserAgent cpan ExtUtils::XSBuilder cpan -f Apache::SessionX
yum -y install epel-release # required for mod_perl dnf --enablerepo=epel -y install mod_perl-devel perl-Apache-Session perl-ExtUtils-PkgConfig cpan LWP::UserAgent cpan ExtUtils::XSBuilder cpan -f Apache::SessionX
You can download Embperl from CPAN or from https://www.embperl.org/downloads
Beta Versions and release candidates are only available from https://www.embperl.org/downloads
You will be asked if you want to compile in support for Apache mod_perl. If you say yes, the source of Apache is searched (for headerfiles). If it can't found, please specify the basepath. Please make sure mod_perl is already installed. If you have installed mod_perl-0.96 or higher, Makefile.PL automatically suggests the same source path as was used to build mod_perl.
NOTE 1: For using session handling you need Apache::Session 1.53 and Apache::SessionX 2.00b3 or higher.
NOTE 2: Embperl runs without additional Perl modules, but the make test needs the following modules to work:
make test
URI
MIME::Base64
HTML::Parser
HTML::HeadParser
Digest::MD5
libnet
libwww
libwin32 (only Win32)
NOTE 3: EmbperlObject needs the following modules to work:
File::Spec 0.8 or higher
If you have already successfully build and tested mod_perl all modules will already be there.
make test can take several options, which can be given with the TESTARGS parameter:
TESTARGS
make test TESTARGS="--help"
will show you a list of available option. Most of them you will never need, they are mainly nesseccary for debugging Embperl itself.
Starting with Embperl 2.0b4 it has a build in XSLT support. You can use Gnome libxml and libxslt. Embperl is currently tested with libxslt 1.0.4 and newer.
To use libxml/libxslt, download them from https://xmlsoft.org/ and install them on your system. Makefile.PL will automatically detect the installed libraries and linked them into Embperl. (you have to make sure that xml2-config and xslt-config can be found and run by Makefile.PL)
The Debian packages "libhtml-embperl-perl" and "libembperl-perl" are are available from the usual Debian mirrors.
To compile Embperl you need to install apache2-dev and libapache2-mod-perl2-dev.
If you have an UNIX with preinstalled Apache and mod_perl (e.g. a Linux distribution), you need to locate the following files on your disk, in case Makefile.PL does not find them automatically:
Makefile.PL
For example they could be found at
In most cases it is sufficent to have to apache-dev and mod_perl-dev packages from your favourite Linux distribution installed.
Now go to the Embperl directory and start
When get asked for the Apache sources, enter the directory where you found httpd.h (e.g. /usr/include/apache). For the Apache executable enter the path to httpd. If the Apache modules are loaded dynamicly, the you will get ask for mod_env.so, enter it's directory. Now you can continue as normal with
httpd.h
/usr/include/apache
httpd
mod_env.so
NOTE: You need mod_perl >= 1.12 on win32
On Windows 95/NT you have to do the following:
(you must have the c compiler in your path) if you get an error about compiling Embperl.c. Edit Embperl.c and change
-#line "Embperl.xs"
to
+#line 1 "Embperl.xs"
now re-run nmake and it should compile.
NOTE: nmake test needs libwin32, libwww and HTML::Parser installed to work
First get and install ActiveState Perl from https://www.activestate.com/
You can skip the installation of Apache and mod_perl, if you only want to use Embperl offline or as CGI.
Next get the Apache binary (including the source e.g. apache_1.3.31-win32-x86-src.msi) from https://www.apache.org/dist/httpd/binaries/win32/ or a mirror. (You may need to install the windows MSI installer from the same page too, and be sure to read the README at the end of the file list for further requirements of some windows versions, especially Windows 95 and XP). Now run the installation.
Then install mod_perl. How to do this is described very detailed at https://perl.apache.org/docs/1.0/os/win32/install.html#PPM_Packages
In this file, you'll find a short summary of that page.
There are two ways to install mod_perl:
+ Easy version:
Download the perl script https://perl.apache.org/docs/1.0/os/win32/mpinstall and execute it with "perl mpinstall". It will interactively install you the right mod_perl version.
+ Manual installation:
Run the ppm program to install mod_perl - If you have Perl 5.8.x: ppm install https://theoryx5.uwinnipeg.ca/ppms/mod_perl-1.ppd - If you have Perl 5.6.x: ppm install https://theoryx5.uwinnipeg.ca/ppmpackages/mod_perl.ppd If you get asked for the Apache directory, enter the C<modules> subdirectory under the path where you have installed your Apache, e.g. \Program Files\Apache Group\Apache\modules
As last step you can install the Embperl ppd:
+ If you have Perl 5.8.x:
ppm install https://theoryx5.uwinnipeg.ca/ppms/Embperl-1.ppd This is an Embperl 2 ppd, the "-1" at the end of the package name denotes that this ppd is for mod_perl 1.x. There is no Embperl 1 ppd for Perl 5.8.x (yet).
+ If you have Perl 5.6.x:
- Embperl 1: ppm install https://theoryx5.uwinnipeg.ca/ppmpackages/HTML-Embperl.ppd - Embperl 2: ppm install https://theoryx5.uwinnipeg.ca/ppmpackages/Embperl.ppd
First install ActiveState Perl, Apache and mod_perl as described above. Make sure you have an Apache version which includes the sources. (Of course when you want to use Embperl only offline or as CGI you don't have to install Apache and mod_perl)
Then extract the Embperl distribution and go to the directory where you have extracted Embperl. Start
perl Makefile.PL
Enter y or hit enter when you get ask "Build with support for Apache mod_perl?(y/n) [y]" When get asked for the Apache source enter the Apache directory you have installed above. e.g. \Program Files\Apache Group.
Now you can continue by running
nmake test nmake install
Unlike Unix, Windows loads any needed DLL (dynamic libraries) at startup. This causes trouble when Embperl is compiled for use with Apache and mod_perl, but is used outside of Apache, because Windows tries to load ApacheCore.dll. To solve this problem Embperl 1.3.4+ can install a Apache and a non Apache version. To do this first install the Apache version as decribed above (includeing the nmake install) . Afterwards rerun Makefile.PL, when ask for mod_perl support answer no, now Makefile.PL detects that a mod_perl version was already compiled and asks if you what a separte non Apache version. Just say yes here and compile and install this version too. When Embperl is loaded it detects if runs in- or outside of Apache and loads the correct library.
nmake install
Embperl currently does not support Apache 2.0 on Windows (on UNIX is does). This is due to the fact the Embperl is not fully thread safe yet. Makeing Embperl thread safe and support for Apache 2.0 on Windows, is currently under development.
IMPORTANT: Before using Embperl 2.0, make sure you have read the README.v2. The documentation is only partially updated to 2.0 yet!!
You can view the documentation at any time from the Embperl source directory, by using the following commands metioned below. After the installation you can also view documention by specifying the full module name: e.g.
perldoc Embperl, perldoc Embperl::Intro etc.
To get familiar how Embperl works, read the "Intro" and "IntroEmbperlObject" documents. To learn how to use and configure Embperl, read the "Embperl documentation".
See "perldoc Features" for list of Embperls features
See "perldoc Intro" for an step by step introduction to Embperl.
See "perldoc IntroEmbperlObject" for an step by step introduction to the OO features of Embperl.
See "perldoc IntroEmbperl2.pod" for Introduction to Embperl 2 advanced features.
See "perldoc Config" for configuration and calling Embperl.
See "perldoc Embperl" for complete documentation.
See "perldoc TipsAndTricks" for Tips and Tricks around Embperl.
or you can view it online on https://perl.apache.org/embperl/ and https://www.actevy.io/embperl/
To install Embperl, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Embperl
CPAN shell
perl -MCPAN -e shell install Embperl
For more information on module installation, please visit the detailed CPAN module installation guide.