File::SortedSeek - A Perl module providing fast access to large files
use File::SortedSeek ':all'; open BIG, $file or die $!; # find a number or the first number greater in a file (ascending order) $tell = numeric( *BIG, $number ); # read a line in from where we matched in the file $line = <BIG>; print "Found exact match as $line" if File::SortedSeek:was_exact(); # find a string or the first string greater in a file (alphabetical order) $tell = alphabetic( *BIG, $string ); $line = <BIG>; # find a date in a logfile supplying a scalar localtime type string $tell = find_time( *BIG, "Thu Aug 23 22:59:16 2001" ); # or supplying GMT epoch time $tell = find_time( *BIG, 998571554 ); # get all the lines after our date @lines = <BIG>; # get the lines between two logfile dates $begin = find_time( *LOG, $start ); $end = find_time( *LOG, $finish ); # get lines as an array @lines = get_between( *LOG, $begin, $end ); # get lines as an array reference $lines = get_between( *LOG, $begin, $end ); # use you own sub to munge the file line data before comparison $tell = numeric( *BIG, $number, \&epoch ); $tell = alphabetic( *BIG, $string, \&munge_line ); # use methods on files in reverse alphabetic or descending numerical order File::SortedSeek::set_descending(); # for inexact matches set FH so first value read is before and second after File::SortedSeek::set_cuddle(); # get last $n lines of any file as an array @lines = get_last( *BIG, $n ) # or an array reference $lines = get_last( *BIG, $n ) # change the input record separator from the OS default @lines = get_last( *BIG, $n, $rec_sep )
File::SortedSeek provides fast access to data from large files. Three methods numeric() alphabetic() and find_time() depend on the file data being sorted in some way. Dictionaries are and obvious example but log files are also sorted (by date stamp). The get_between() method can be used to get a chunk of lines efficiently from anywhere in the file. The required position(s) for the get_between() method are supplied by the previous methods. The get_last() method will efficiently get the last N lines of any file, sorted or not.
With sorted data a linear search is not required. Here is a typical linear search
while (<FILE>) { next unless /$some_cond/ # found cond, do stuff }
Remember that old game where you try to guess a number between lets say 0 and say 128? Let's choose 101 and now try to guess it.
Using a linear search is the same as going 1 higher 2 higher 3 higher ... 100 higher 101 correct! Consider a geometric approach: 64 higher 96 higher 112 lower 104 lower 100 higher 102 lower - ta da must be 101! This is the halving the difference or binary search method and can be applied to any data set where we can logically say higher or lower. In other words any sorted data set can be searched like this. It is a far more efficient method - see the SPEED section for a brief analysis.
There are two basic methods - numeric() to do numeric searches and alphabetic() that does alphabetic searches.
You call the functions like this:
$tell = numeric( *BIG, $find ); $tell = alphabetic( *BIG, $find );
These methods take two required arguments. *BIG is a FILEHANDLE to read from. $find is the item you wish to find. $find must be appropriate to the function as the numeric method will make numeric comparisons ( == < > ). Similarly the alphabetic method makes string comparisons ( eq lt gt ). You will get strange results if you use the wrong method just as you do if you use < when you actually meant lt
The return value from the numeric() and alphabetic() methods depend on the result of the search. If the search fails the return value is undef. A search can succeed in two ways. If an exact match is found then the current file position pointer is set to the beginning of the matching line. The return value is the corresponding response from tell(). This means that the next read from <FILEHANDLE> will return the matching line. Subsequent reads return the following lines as expected.
Alternatively a search will succeed if a point in the file can be found such that $find is cuddled between two adjacent lines. For example consider searching for the number 42 in a file like this:
.. 36 40 <- Before 44 <- After 48 ..
The number 42 is not actually there but the search will still succeed as it is between 40 and 44. By default the file position pointer is set to the beginning of the line '44' so the next read from <FILEHANDLE> will return this line. If the File::SortedSeek::set_cuddle() function is called then the file position pointer will be set to the beginning of line '40' so that the first two reads from <FILEHANDLE> will cuddle the in-between value in $find.
You can find out if the match was exact by checking the value returned by File::SortedSeek::was_exact() which will be true if the match was exact.
Both the numeric and alphabetic subs take an optional third argument. This optional argument is a reference to a subroutine to munge the file lines so that suitable values are extracted for comparison to $find.
$tell = numeric( *BIG, $find, \&munge_line ); $tell = alphabetic( *BIG, $find, \&munge_line );
A good example of this is the find_time() function. This is just an implementation of the basic numeric algorithm similar to this.
$tell = numeric ( *BIG, $epoch_seconds, \&get_epoch_seconds );
As the search is made the test lines are passed to the munging sub. This sub needs to return a string or number that we can perform comparison on. In this case the get_epoch_seconds sub looks for something that resembles a date string, parses out the hh mm ss dd mm yyyy data, passes it to Time::Local for conversion to epoch seconds and returns this number.
The optional arguments offered by Search::Dict to use dictionary order (by removing non word/whitespace chars) and to ignore case are not directly supported by File::SortedSeek, however they are easily implemented with a simple munge function that does this:
sub munge { local $_ = shift; s/[^\w\s]//g; # removes non word/space chars for dictionary order return lc $_; # makes comparison case insensistive }
This function returns the epoch seconds represented by a date string in the most common log file formats namely:
Asctime format: Tue May 27 15:45:00 2008 Apache format: [21/May/2008:17:49:39 +1000] Squid format: 1012429341.115
The find_time() method uses this function internally. You can write your own munge function if you need a different format. RTFS to see how but all the function needs to do is take a data line and return a number that represents the time. You could also use Date::Parse to do this for you.
The find_time() function is an implementation of the basic numeric method as discussed briefly above. You call it like:
$tell = find_time( *LOG, 'Thu Jan 1 00:42:00 1970' ); $tell = find_time( *LOG, $epoch_seconds );
You may use either a date string recognised by get_epoch_seconds() or just epoch seconds directly.
Say you have a logfile and you want to get the log between one date and another. You can simply use two calls to the find_time() to get the beginning and end positions and then use get_between() to get the lines.
# get the lines between two logfile dates $begin = find_time( *LOG, $start ); $end = find_time( *LOG, $finish ); # get lines as an array @lines = get_between( *LOG, $begin, $end ); # get lines as an array reference $lines = get_between( *LOG, $begin, $end );
The get_between() method returns an array in list context as above and a reference to an array in scalar context.
This function splits the lines based on a non system specific default record separator heuristic. This is defined below:
my $default_rec_sep = qw/\015\012|\015|\012/;
It should DWIM most of the time. You can override this on a per file basis by passing the record separator to the get_between() function.
@lines = get_between( *LOG, $begin, $end, $rec_sep );
Modifying $/ has no effect. Note that *the record separator is not returned* in the array. As a result the returned array has effectively had every element chomped.
Using the get_between() method you can efficiently get the lines at the beginning of a file. Although you can just read in lines sequentially with a while loop this requires that you test each line. If you can find the end point using the find_time() numeric() or alphabetic() methods you can the just get what you need. For large files many thousands of unnecessary tests are avoided saving time. Using the example above you simply set $begin to 0
$begin = 0; $end = find_time( *LOG, $finish ); @lines = get_between( *LOG, $begin, $end );
You can similarly use get between to get all the lines from a specific point up to the end of the file. The end is just the size of the file so:
$begin = find_time( *LOG, $start ); $end = -s LOG; @lines = get_between( *LOG, $begin, $end );
This method does not depend on the file being sorted to work. When you use the get_last() method the module estimates how many bytes at the end of the file to read in. To make the estimate the module multiplies the default line length (80 chars) by the number of lines required and then doubles it.
If it does not get sufficient lines on its first attempt it re-estimates the line length from the actual data read in, re-calculates the read, doubles it and then tries again. This algorithm is unlikely to take more than 2 reads but if you have unusually long of short lines you may get a small speed benefit by using the set_line_length() method to set the average line length. The default is 80 chars per line. Setting the line length close to the actual will also avoid reading a excessive quantity of data into memory.
# get last $n lines of any file as an array @lines = get_last( *BIG, $n ) # or an array reference $lines = get_last( *BIG, $n ) # change the input record separator from the default @lines = get_last( *BIG, $n, $rec_sep )
It should DWIM most of the time. You can override this on a per file basis by passing the record separator to the get_between() function. Example script in eg/tail.pl
Nothing by default. The following 5 methods are available for import:
alphabetic() numeric() find_time() get_between() get_last()
You can import just the method(s) you want with:
use File::SortedSeek qw(numeric);
or all 5 methods using the ':all' tag.
use File::SortedSeek ':all';
There are some options available via non exported function calls. You will need to fully specify the name if you want to use these.
If a function returns undefined there has been an error. error() will contain the text of the last error message or a null string if there was no error.
was_exact() will return true if an exact match was found. It will be false if the match was in between or failed.
set_cuddle() changes the default line returned for in between matches as discussed above.
set_no_cuddle() restores default behaviour
By default ascending numerical order and alphabetical order are assumed. This assumption can be reversed by calling set_descending() and reset by calling set_ascending() We need to know the order to seek within the file in the correct direction.
Reset sort order assumption to default.
Activate error messages. This is the default.
Silence error messages
Here is a table that demonstrates the advantage of using the binary search algorithm.
Num items Lin av Bin av Lin:Bin 2 1 1 1 4 2 2 1 8 4 3 1 16 8 4 2 32 16 5 3 64 32 6 5 128 64 7 9 256 128 8 16 512 256 9 28 1024 512 10 51 2048 1024 11 93 4096 2048 12 170 8192 4096 13 315 16384 8192 14 585 32768 16384 15 1092 65536 32768 16 2048 131072 65536 17 3855 262144 131072 18 7281 524288 262144 19 13797 1048576 524288 20 26214
Even though there is an overhead involved with this search this is minor as the number of tests required is so much less. Speed increases of 1000 of times are typical.
An OO interface slows things down by > 50% so is not used.
All previously known ones have been removed.
Peter (Stig) Edwards for bugfixes and getting the refactoring started using the cunning expedient of not just sending patches but also a refactored core.
Search::Dict for the basis of the code used to replace the original core search function.
(c) Dr James Freeman 2000-08 <airmedical [TA] gmail.com> All rights reserved.
This package is free software and is provided "as is" without express or implied warranty. It may be used, redistributed and/or modified under the terms of the Artistic License 2.0. A copy is include in this distribution.
For details about the mystical significance of the number 42 and how it can be applied to Life the Universe and everything see The Hitch Hiker's Guide to the Galaxy 'trilogy' by the recently departed Douglas Adams.
To install File::SortedSeek, copy and paste the appropriate command in to your terminal.
cpanm
cpanm File::SortedSeek
CPAN shell
perl -MCPAN -e shell install File::SortedSeek
For more information on module installation, please visit the detailed CPAN module installation guide.