This is a Frequently Asked Questions list about Device::Modem perl extension.
Device::Modem
Device::Modem is a perl extension written in pure perl that allows to communicate with modems, or generically with AT command set compliant devices connected to your computer via a serial port.
AT command set compliant
Cosimo Streppone (cosimo@cpan.org), an italian guy who works and enjoys writing perl programs and objects. If you want to know more, go to http://www.streppone.it/cosimo/work/perl/
If you are asking that, probably you are in the wrong place.
Perl is a wonderful programming language, that cuts development times, helps developer keep mental health, good life-style, doesn't pollute developer's mind, allows complete freedom of style, and (from perl manual), gives you enough rope to hang yourself.
Some starting points:
http://www.perl.com - Reference site for Perl programmers
http://www.perl.org - Perl Mongers home
http://cpan.perl.org - Comprehensive Perl Archive Network
http://www.perlmonks.org - Higher Perl souls
http://use.perl.org - Large Perl community
AT command set
It is a set of standard commands, also called Hayes, in which (almost) all commands begin with AT prefix and they allow to control a modem, router, whatever device. Also cellular phones work with a subset of standard AT commands.
Hayes
AT
What the heck are you doing here? http://www.google.com/search?q=Tech+glossary+modem
You must have:
A working computer with a standard RS-232 serial port
An AT-compliant device (a modem will do perfectly here :-)
A working Perl installation
Device::SerialPort module installed if you are on some unix platform. Win32::SerialPort module installed if you are on Win32 platform.
Device::SerialPort
Win32::SerialPort
Device::Modem works close to the serial port communication layer, which varies on many platforms. It relies on Device::SerialPort and Win32::SerialPort modules for all low-level communication layer.
It tries to build a platform independent layer above these two low-level modules, so developers don't need to distinguish among different platforms.
It's been reported to work on Win32, Linux, Mac OS X, FreeBSD, NetBSD, OpenBSD, ARM-Linux and Solaris.
Win32
Linux
Mac OS X
FreeBSD
NetBSD
OpenBSD
ARM-Linux
Solaris
Yes, it is allowed by its license, that is the same as Perl language. If you are using it in a commercial package, or plan to do so, please inform the author (Cosimo Streppone, cosimo@cpan.org). Thank you.
This is an open-source software developed in my little home spare time and for my personal interest and amusement. This module has a test suite, but it is not very extensive, so it is possible that some feature X does not work, or it is not implemented yet or I cannot test it.
If you are in this situation, please contact me and provide the following information:
Your operating system version and architecture. Complete output of perl -V command is good for this.
perl -V
Your perl version. Again perl -V.
Your Device::Modem, Device::SerialPort and (if you are using it) Device::Gsm version. In case of doubt, send the output of:
Device::Gsm
perl -MDevice::Modem -le 'print Device::Modem->VERSION'
Thank you.
This is definitely reported to be working by several users, who also contributed patches and tested the feature.
Otherwise, just look at Aaron Mitti's Device::SerialPort::Xmodem CPAN module.
It might seem that XModem and ZModem should be well over dead at this point. But, looks like several old/new devices still support them.
So, ZModem support has been contributed by a user, and will be added to the main release Soon(tm).
First of all, be sure to use Device::Modem version 1.52+.
Probably you don't have the correct permissions to access your modem device (usually /dev/modem, or /dev/ttyS0 on unix and COM1/COM2/... on windows). Or you are trying to use the examples that come with Device::Modem distribution with an older version (Device::Modem <= 1.33).
In this case, you should upgrade to Device::Modem 1.52+.
Again, upgrade to Device::Modem version 1.52+.
If you get this error, it means that the communication port could not be opened. Most probably you don't have permissions to access your serial port, or you have used a wrong device name (check your device entry in /dev folder).
/dev
Since version 1.52, Device::Modem::connect() will try to automatically reconnect if your port connection shuts down, or the Device::SerialPort, or Win32::SerialPort underlying object is deleted or invalidated.
Device::Modem::connect()
You should really upgrade to Device::Modem 1.52+.
No. What you can do, is voice call dialing. After the dialing though, you have to speak. Your computer can not do that, unless you have a PBX board, at least not with Device::Modem.
Make sure you are using that latest version. From version 1.30, the main "send-command" / "wait-answer" cycle has been sensibly improved for speed, though you now have to specify a timeout if you want the module to wait an answer if modem is not ready.
Probably this is the better compromise...
Oh, yes! Please feel free to contact cosimo@cpan.org to decide details about this... :-)
Uh.
Please contact me, so I can improve my software design, ideas and coding, but only if you explain the reasons of your criticism. Thank you.
To install Device::Modem, copy and paste the appropriate command in to your terminal.
cpanm
cpanm Device::Modem
CPAN shell
perl -MCPAN -e shell install Device::Modem
For more information on module installation, please visit the detailed CPAN module installation guide.