AI::FuzzyEngine - A small Fuzzy Engine
use AI::FuzzyEngine; # Engine (or factory) provides fuzzy logical arithmetic my $fe = AI::FuzzyEngine->new(); # Disjunction: my $a = $fe->or ( 0.2, 0.5, 0.8, 0.7 ); # 0.8 # Conjunction: my $b = $fe->and( 0.2, 0.5, 0.8, 0.7 ); # 0.2 # Negation: my $c = $fe->not( 0.4 ); # 0.6 # These functions are constitutive for the operations # on the fuzzy sets of the fuzzy variables: # VARIABLES (AI::FuzzyEngine::Variable) # input variables need definition of membership functions of their sets my $flow = $fe->new_variable( 0 => 2000, small => [0, 1, 500, 1, 1000, 0 ], med => [ 500, 0, 1000, 1, 1500, 0 ], huge => [ 1000, 0, 1500, 1, 2000, 1], ); my $cap = $fe->new_variable( 0 => 1800, avg => [0, 1, 1500, 1, 1700, 0 ], high => [ 1500, 0, 1700, 1, 1800, 1], ); # internal variables need sets, but no membership functions my $saturation = $fe->new_variable( # from => to may be ommitted low => [], crit => [], over => [], ); # But output variables need membership functions for their sets: my $green = $fe->new_variable( -5 => 5, decrease => [-5, 1, -2, 1, 0, 0 ], ok => [ -2, 0 0, 1, 2, 0 ], increase => [ 0, 0, 2, 1, 5, 1], ); # Reset FuzzyEngine (resets all variables) $fe->reset(); # Reset a fuzzy variable directly $flow->reset; # Fuzzification of input variables $flow->fuzzify( 600 ); $cap->fuzzify( 1000 ); # Membership degrees of the respective sets are now available: my $flow_is_small = $flow->small(); # 0.8 my $flow_is_med = $flow->med(); # 0.2 my $flow_is_huge = $flow->huge(); # 0.0 # RULES and their application # a) first step, result is $saturation, an intermediate set # implicit application of 'and' # Multiple calls to a membership function # are similar to 'or' operations: $saturation->low( $flow->small(), $cap->avg() ); $saturation->low( $flow->small(), $cap->high() ); $saturation->low( $flow->med(), $cap->high() ); # Explicite 'or', 'and' or 'not' possible: $saturation->crit( $fe->or( $fe->and( $flow->med(), $cap->avg() ), $fe->and( $flow->huge(), $cap->high() ), ), ); $saturation->over( $fe->not( $flow->small() ), $fe->not( $flow->med() ), $flow->huge(), $cap->high(), ); $saturation->over( $flow->huge(), $fe->not( $cap->high() ) ); # b) second step, deduce output variable from internal state of saturation $green->decrease( $saturation->low() ); $green->ok( $saturation->crit() ); $green->increase( $saturation->over() ); # All sets provide the respective membership degrees of their variables: my $saturation_is_over = $saturation->over(); # no defuzzification! my $green_is_ok = $green->ok(); # Defuzzification ( is a matter of the fuzzy set ) my $delta_green = $green->defuzzify(); # -5 ... 5
Nothing is exported or exportable.
This module is yet another implementation of a fuzzy inference system. The aim was to be able to code rules (no string parsing), but avoid operator overloading, and make it possible to split calculation into multiple steps. All intermediate results (memberships of sets of variables) should be available.
Credits to Ala Qumsieh and his AI::FuzzyInference, that showed me that fuzzy is no magic. I learned a lot by analyzing his code, and he provides good information and links to learn more about Fuzzy Logics.
The AI::FuzzyEngine object defines and provides the elementary operations for fuzzy sets. All set memberships are values from 0 to 1. Up to now there is no choice with regard how to operate on sets:
$fe->or( ... )
Maximum of membership degrees
$fe->and( ... )
Minimum of membership degrees
$fe->not( $var->$set )
1-degree of membership
Maximum
Defuzzification is based on
Clip membership function of a set according to membership degree, before the implicated memberships of all sets of a variable are taken for defuzzification:
Centroid of aggregated (and clipped) membership functions
Creation of an AI::FuzzyEngine object by
AI::FuzzyEngine
my $fe = AI::FuzzyEngine->new();
This function has no parameters, but provides the fuzzy methods or, and and not, as listed above. I plan to introduce alternative fuzzy operations, they will be configured as arguments to new.
or
and
not
new
Once created, the engine can create fuzzy variables by new_variable:
new_variable
my $var = $fe->new_variable( $from => $to, $name_of_set1 => [$x11, $y11, $x12, $y12, ... ], $name_of_set2 => [$x21, $y21, $x22, $y22, ... ], ... );
Result is an AI::FuzzyEngine::Variable. The name_of_set strings are taken to assign corresponding methods for the respective fuzzy variables. They must be valid function identifiers.
Fuzzy variables provide a method to fuzzify input values:
$var->fuzzify( $val );
according to the defined sets and their membership functions.
The memberships of the sets of $var are accessible by the respective functions:
my $membership_degree = $var->$name_of_set();
Memberships can be assigned directly (within rules for example):
$var->$name_of_set( $membership_degree );
If multiple membership_degrees are given, they are "anded":
$var->$name_of_set( $degree1, $degree2, ... ); # "and"
By this, simple rules can be coded directly:
my $var_3->zzz( $var_1->xxx, $var_2->yyy, ... ); # "and"
this implements the fuzzy implication
if $var_1->xxx and $var_2->yyy and ... then $var_3->zzz
The membership degrees of a variable's sets can be reset to undef:
$var->reset(); # resets a variable $fe->reset(); # resets all variables
The fuzzy engine $fe has all variables registered that have been created by its new_variable method.
$fe
A variable can be defuzzified:
my $out_value = $var->defuzzify();
Sometimes internal variables are used that need neither fuzzification nor defuzzification. They can be created by a simplified call to new_variable:
my $var_int = $fe->new_variable( $name_of_set1 => [], $name_of_set2 => [], ... );
Hence, they can not use the methods fuzzify or defuzzify.
fuzzify
defuzzify
Fuzzy operations are simple operations on floating values between 0 and 1:
my $conjunction = $fe->and( $var1->xxx, $var2->yyy, ... ); my $disjunction = $fe->or( $var1->xxx, $var2->yyy, ... ); my $negated = $fe->not( $var1->zzz );
There is no magic.
A sequence of rules for the same set can be implemented as follows:
$var_3->zzz( $var_1->xxx, $var_2->yyy, ... ); $var_3->zzz( $var_4->aaa, $var_5->bbb, ... );
The subsequent application of $var_3->zzz(...) corresponds to "or" operations (aggregation of rules).
$var_3->zzz(...)
Only a reset can reset $var_3.
$var_3
This is my first module. I'm happy about feedback that helps me to learn and improve my contributions to the Perl ecosystem.
Please report any bugs or feature requests to bug-ai-fuzzyengine at rt.cpan.org, or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=AI-FuzzyEngine. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.
bug-ai-fuzzyengine at rt.cpan.org
You can find documentation for this module with the perldoc command.
perldoc AI::FuzzyEngine
You can also look for information at:
RT: CPAN's request tracker (report bugs here)
http://rt.cpan.org/NoAuth/Bugs.html?Dist=AI-FuzzyEngine
AnnoCPAN: Annotated CPAN documentation
http://annocpan.org/dist/AI-FuzzyEngine
CPAN Ratings
http://cpanratings.perl.org/d/AI-FuzzyEngine
Search CPAN
http://search.cpan.org/dist/AI-FuzzyEngine/
Juergen Mueck, jurgen.muck@yahoo.de
Copyright (c) Juergen Mueck 2013. All rights reserved.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
To install AI::FuzzyEngine, copy and paste the appropriate command in to your terminal.
cpanm
cpanm AI::FuzzyEngine
CPAN shell
perl -MCPAN -e shell install AI::FuzzyEngine
For more information on module installation, please visit the detailed CPAN module installation guide.